CREWORKS Manual Wire Stripper Machine, 0.06"-1" Wire Stripping Machine, Wire Stripping Tool for 1.5-25 mm Scrap Wire, 5 Channel Cable Stripper for Power Drill, Copper Wire Stripper for Leftover Cable

Product Information

If you have only 1 size of wire to commonly strip, the BWS-60‘s is an economical choice. 7. Stripping scrap wire with a Multi Feed Electric Motor wire stripping machine Likely Results: Very good for stripping of insulation on wire diameters of 1/4″ up to 2000 MCM. Not so easy for wire thinner than 1/4″ in diameter.

With the amount of constant adjustment you will have to do to operate these little manual wire strippers, we highly suggest going with a Drill Power Multi Feed wire stripping machine such as the BWS-38-MF-DA. 4. Using a Single Blade – manual drill powered wire stripping machine Single Blade manual wire stripping machine – Only recommended if you have low volumes of scrap wire to strip. Many of those little wire stripping machines never pay for themselves because without a doubt you will be fumbling around trying to get them to work right. These machines are also priced accordingly. So, you will get what you pay for. 5. Stripping Scrap wire using a Multi-Feed drill powered manual wire stripping machine Drill powered manual wire stripping machine. These are the easiest manual wire stripping machines to operate. Use either the hand crank or attach a drill.

Copper, Aluminium, Steel, Lead Scrap Wire Strippers

When it comes to stripping scrap copper cable, using a single blade manual wire stripper or single blade drill powered machine is truthfully one step above using a utility knife. Yes, it will strip scrap wire, but it may not be the most efficient method. In fact, you probably are going to get tired of the wire slipping out from under the blade which is one of the most common complaints about these units. Scrap copper value: Not good. Scrapyards commonly penalize burnt copper and give you a lower rate for its blemishes. These machines are ideal for operators who don’t want to mess around with constantly adjusting a machine. The time it will save you to strip wire and your ROI will pay for these machines in no time. Adjustable Tension.

The simple and safe adjustable blade and feed roller system make it easy to remove insulation from all wire sizes. This includes small wire to large cable from 1/16”- 7 ½” diameter. Stripping Experience: Plenty of manual adjustment. Works great for the same wire size. Not recommended for 1/4″ scrap wire and below.Recommended best selling machines to strip scrap copper wire: BWS-60 Single blade wire stripping machine for Electricians